维拉帕米脉冲控释片的设计和制备
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Design and preparation of press-coated tablet for pulsed-release of verapamil
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    目的:针对高血压、心绞痛常在凌晨发作的特点,研制夜间服药、凌晨释放的维拉帕米(VR)脉冲控释片。方法:全面考察影响药物释放滞后时间的因素。选用3种强崩解剂的不同用量,考察片芯崩解剂对时滞的影响。通过均匀设计实验考察外层包衣的组成和片剂的硬度,多元回归筛选最优处方,并考察不同溶出条件对控释效果的影响。结果:片芯所用的3种崩解剂以羧甲基淀粉钠的崩解性能较好,用量设计在25%左右。外层包衣处方中PEG 6000增加,氢化蓖麻油(HCO)、乙烯-醋酸乙烯共聚物(EVA)用量减少,硬度减小,释放滞后时间减少。由此确定释放滞后时间为3和5h的两个基本处方。结论:VR压制包衣片在体外溶出实验中能实现脉冲释药,并能通过调节辅料用量实现不同控释效果。

    Abstract:

    Objective: To develop pulsed-release system of verapamil in the light of circadian rhythms of hypertensive patients. Methods: Factors affecting the lag time of the system were tested. Three swelling disintegrates (L-HPC,CMS-Na, CMC-Ca) of different contents were used. Various composition of out shell was tested through the uniform design and dealed with multiple regression. Two basic formulations with lag time 3 and 5h were decided. Results: The lag time 5h formulation: CMS-Na was the preferable disintegrant with a content of 15mg/tablet, out shell composition were chosen as following: PEG 6000 110mg, HCO 105mg, EVA 25mg each tablet, hardness 490kPa. Conclusion: A new press-coated tablet for the pulsed-release of drug after a programmable period of time is achieved in the in vitro dissolution test.

    参考文献
    相似文献
    引证文献
相关视频

分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码
重要通知
友情提醒: 近日发现论文正式见刊或网络首发后,有人冒充我刊编辑部名义给作者发邮件,要求添加微信,此系诈骗行为!可致电编辑部核实:021-81870792。
            《海军军医大学学报》编辑部
关闭